Konfigurasi T-sel Flash Unlimited di Ubuntu Linux
June 29, 2008Kemaren gue menginstall Ubuntu Linux 8.04 codenam Hardy Heron. CD instalasi yang gue dapetkan dari paket kiriman terbaru Canonical. Sebelumnya gue mengalami masalah menggunakan Ubuntu 7.10 yang relatif tidak stabil. Bahkan dari instalasi saja 7.10 sangatlah lambat. Berbeda dengan versi 8.04 ini.
Setelah Ubuntu terinstal gue pengen sekali agar bisa konek ke internet menggunakan Ubuntu, agar bisa mengunduh berbagai macam aplikasi yang sesuai dengan kebutuhan gue. Dengan berbekal ponsel Sony Ericsson w880i yang menggunakan kartu Halo dengan paket Flash Unlimited, kita harus melakukan konfigurasi secara manua, berikut langkah-langkahnya:
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 062a:0000 Creative Labs Optical Mouse
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 0fce:d068 Sony Ericsson Mobile Communications AB
Bus 001 Device 001: ID 0000:0000
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,\”IP\”,\”internet\”
Modem Type = USB Modem
Phone = *99***1#
ISDN = 0
Username = ”
Password = ”
Baud = 460800
New PPPD = yes
Modem = /dev/ttyACM0
; Phone =
; Password =
; Username =
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","internet"
AT+CGDCONT=1,"IP","internet"
OK
--> Modem initialized.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
CONNECT
~[7f]}#@!}!}!} }8}#}$@#}(}”}’}”}”}&} } } } }%}&[01]5-$7{~
–> Carrier detected. Waiting for prompt.
~[7f]}#@!}!}”} }8}#}$@#}(}”}’}”}”}&} } } } }%}&[01]5-$}]i~
–> PPP negotiation detected.
–> Starting pppd at Thu May 29 08:32:01 2008
–> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
–> –> PAP (Password Authentication Protocol) may be flaky.
–> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied
–> –> CHAP (Challenge Handshake) may be flaky.
–> Pid of pppd: 6031
–> Using interface ppp0
–> pppd: ?/
–> pppd: ?/
–> pppd: ?/
–> pppd: ?/
–> pppd: ?/
–> pppd: ?/
–> local IP address 221.132.239.212
–> pppd: ?/
–> remote IP address 10.64.64.64
–> pppd: ?/
–> primary DNS address 202.3.208.10
–> pppd: ?/
–> secondary DNS address 202.3.210.10
–> pppd: ?/
Posted by ilamona
Related Posts
18 responses so far!
-
waterbomm
June 30, 2008
nice tutorial
thanks for your tutorial -
Raffaell
June 30, 2008
bro, minta cara info sewa inet yang unlimit dong, adikku mau pasang di indo, untuk wilayah depok…
-
annmolly
June 30, 2008
@Raffaell
sori Raffa gue ngga tinggal di jkt palagi di depok
-
SHALEH
July 1, 2008
Jakarta, Depok
:) -
mriza
July 1, 2008
8)
… btw, nokia pc suit-suit… bisa di install gak yah pake wine..? -
annmolly
July 1, 2008
@mriza
wine sech ada cuman hp nokianya ngga punya. dr beberapa sumber sech byk yg ngga bisa konek. mending lwt linux aja. -
bobi
July 3, 2008
bro, ini uda setting an 3G belon??
-
bobi
July 3, 2008
wah ga bisa tuh mas…
Saya sudah coba script ini…
Malah dia tidak bisa melakukan koneksi..
Mungkin ada setting untuk pin kalee ya…Mohon bimbingannya
-
atrix
July 4, 2008
duh, harus dari shell juga yah walaupun dah ubuntu 8.04, gak bisa lgs dr Kinfo nya aja? maklum balik gaptek kl urusan OS satu ini, abis beda banget dengan dos prompt ..
-
annmolly
July 4, 2008
@bobi
skrip itu dicomot dan dimodifikasi dr forum se development disesuaikan uuntuk flash unlimited. klo pake win bisa ngga? pesan errornya apa?
@atrix
dr zaman dulu urusan konek-mengkonek ke inet di linux mang geto ngga prnh pake GUI. bikin byk orang bingung klo hardwarenya ngga kedetect.
-
Rosyidi
July 8, 2008
wah susah juga ya settingnya. Aku pake windows aja masih bingung, soalnya gak diberi petunjuknya dari telkomsel
-
awym
July 8, 2008
:aie3:
nang, u-buntuku kada mau conet wirelesss. kayapa…
-
annmolly
July 8, 2008
@awym
kualat lo nyantol wireless yg gratisan terus sech. maaf tidak bisa bantu laptop gue sdh rusak 3 bulan lalu
-
Sandy
August 15, 2008
Selama ini aku pake setingan sbb : (Tolong dikoreksi ya)
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=,,”internet”
Modem Type = USB Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttyACM0
ISDN = 0
Phone = *99#
Password = ”
Username = ”
Stupid Mode = 1Hasilnya akan seperti berikut bila di ketikkan di terminal wvdial :
WvDial: WvDial: Internet dialer version 1.56
WvModem: Cannot get information for serial port.
WvDial: Initializing modem.
WvDial: Sending: ATZ
WvDial Modem: ATZ
WvDial Modem: OK
WvDial: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem: OK
WvDial: Sending: AT+CGDCONT=,,”internet”
WvDial Modem: AT+CGDCONT=,,”internet”
WvDial Modem: OK
WvDial: Modem initialized.
WvDial: Sending: ATDT*99#
WvDial: Waiting for carrier.
WvDial Modem: ATDT*99#
WvDial Modem: CONNECT
WvDial Modem: ~[7f]}#@!}!} } }2}#}$@#}!}$}%\}”}&} }*} } g}%~
WvDial: Carrier detected. Starting PPP immediately.
WvDial: Starting pppd at Fri Aug 15 20:59:41 2008
WvDial: Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
WvDial: –> PAP (Password Authentication Protocol) may be flaky.
WvDial: Warning: Could not modify /etc/ppp/chap-secrets: Permission denied
WvDial: –> CHAP (Challenge Handshake) may be flaky.
WvDial: Pid of pppd: 14866
WvDial: Using interface ppp0
WvDial: pppd: X?[06][08]??[06][08][18]?[06][08]
WvDial: pppd: X?[06][08]??[06][08][18]?[06][08]
WvDial: pppd: X?[06][08]??[06][08][18]?[06][08]
WvDial: pppd: X?[06][08]??[06][08][18]?[06][08]
WvDial: local IP address 114.120.8.120
WvDial: pppd: X?[06][08]??[06][08][18]?[06][08]
WvDial: remote IP address 10.6.6.6
WvDial: pppd: X?[06][08]??[06][08][18]?[06][08]
WvDial: primary DNS address 202.3.208.10
WvDial: pppd: X?[06][08]??[06][08][18]?[06][08]
WvDial: secondary DNS address 202.3.210.10
WvDial: pppd: X?[06][08]??[06][08][18]?[06][08] -
jarwadi
September 6, 2008
thx 4 sharing BRO …
i really need the info
-
ronny
October 18, 2008
kalo pki n73 gimana settingnya ya..
-
wahyu
November 20, 2008 (1 week ago)
Pagi Om maaf repotin nih ,kemarin saya coba set wvdial di opensuse pas saya colokin cable data di cpu trus saya jalankan perintah # wvdialconf /etc/wvdial.conf ternya modem HP N73 saya tidak terdetect trus di log muncul error seperti ini
ircomm6: ATQ0 V1 E1 — ATQ0 V1 E1 — failed at 9600 and 19200 baud.
ttySR18: No such device or address
Port Scan: SR18
ircomm12: ATQ0 V1 E1 — ATQ0 V1 E1 — failed at 9600 and 19200 baud.
ttySR24: No such device or address
Port Scan: SR24
ttySR258: No such device or address
Port Scan: SR258
ttySR270: No such device or address
Port Scan: SR270
ttySR275: No such device or address
Port Scan: SR275
ttySR287: No such device or address
Port Scan: SR287
ttyUSB0: No such device or address
Port Scan: USB0Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?Please read the FAQ at http://open.nit.ca/wvdial/
If you still have problems, send mail to wvdial-list@lists.nit.ca.
mohon batuannya Om
terima kasih
wahyu
-
bejo
Today
Salam Opensource, kalo kartu halonya pake pin gimana ya caranya? perintah wvdial jadi kayak gini gak mau konek:
–> WvDial: Internet dialer version 1.60
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: ATZ
ATZ
OK
–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
+CME ERROR: SIM PIN required
–> Bad init string.
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: ATZ
ATZ
OK
–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
+CME ERROR: SIM PIN required
–> Bad init string.
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: ATZ
ATZ
OK
–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
+CME ERROR: SIM PIN required
–> Bad init string.
soerip@soerip-laptop:~$ echo “AT+C